Carr Lock® Subplates for HAAS® VF-2 (14 x 36)

Carr Lock System

Product Information

Carr Lock® Subplates for HAAS® VF-2 (14 x 36)

CL-1436-01-CLSP

Carr Lock® Subplates are precision-machined steel plates with Carr Lock® Receiver Bushings installed in a standard pattern. These subplates serve as the foundation of an efficient quick-change fixturing system. Subplates should generally be large enough to cover most of the machine table, for maximum fixture flexibility, but should never extend beyond the machine table. For maximum quick-change benefits, subplates are usually left permanently on the machine table while only the mounted fixtures or vises are exchanged. Made in USA.

The 14 x 36 subplate shown here has (15) 20mm Face-Mount Receiver Bushings for mounting any of the following:

(2) 14 x 14 Carr Lock® Fixture Plates

(1) 14 x 14 Carr Lock® Fixture Plate (Centered)

(3) Carr Lock® Jigsaw Vise Plates

This subplate is also available as part of two Carr Lock® System Kits (see Related Products below).

Application Information

Subplate with (2) 14 x 14 Fixture Plates
(System Kit CL-1436-00-CLSK)

Subplate with (1) 14 x 14 Fixture Plate

Subplate with (3) Jigsaw Vise Plates
(System Kit CL-1436-01-CLSK)

Accuracy

The Carr Lock® System is extremely accurate. All Receiver-Bushing installation holes are located +/-.0002" from their primary reference hole. Clamping repeatability is +/-.0005", while bushing concentricity is .0002" TIR. The resulting x/y-axis repeatability of a mounted fixture plate is +/-.0028" considering all tolerance accumulation.